• EnglishFrenchGermanItalianPortugueseSpanish English English English

A Govt. of India Recognised Star Export House
NSIC - CRISIL RATING SE 1A

Steefo Engineering Corporation is one of ....the leading

Consultants, Manufacturers and Exporters of Steel Plants specializing in executing projects on turnkey basis.

Products

Bar Finishing, Bundling & Tying System

Gauge Conveyor

  • Total Length – 25M
  • Conveyor roller size: Ø216.3 x 600 BL (mm)
  • Driver gear motor: AC-7.5 HP x 4P x 1/7
  • Gauge stopper cylinder: CB- Ø 150 x 250ST

Packing Bed

  • Size: 12 MW x 7.0 Ml
  • Transfer Inlet-Arm unit x 12 M:
  • Main Shaft: Ø75 x 12 ML
  • Main drive motor: AC-10 HP x 4P x 1/10
  • Main Wrom Gear Reducer: A-200 x 1/30
  • Gear coupling: TY –SB- 150 x 2
  • Conveyor chain: RS-2120S
  • Sprocket: RS 120 x 21 NT
  • Conveyor chain driven unit x 12ML
  • Main Shaft: Ø65 x 12ML
  • Main drive motor: AC –10HP x 4P x 1/10
  • Main Wrom Gear Reducer: A-200 x 1/60
  • Gear Coupling: TY-SB-150 x 2

Bundling Machine

  • Type: TBM-570L
  • Max. Bundled dimension: Ø450 (mm)
  • Dia of guide track: Ø 700(mm)
  • Wire Dia: Ø5.5 (mm)
  • Binding cycle: Max. 7.0 sec. (Excluded wire feed time)
  • Power source: AC-220V+ 10% x 50Hz.
  • With base & wire supply device.

Roller Conveyor

  • Total Length = 31,000 (mm)
  • V-roller before bundling machine = 15,000 (mm)
  • Conveyor drive unit:
  • Drive gear motor: AC-7.5 HP x 4P x 1/19
  • Conveyor roller: Ø216.3 x 450W
  • Coupling: RF-265
  • Roller Chain & Sprocket: RS 100
  • Free V-roller unit:
  • V-roller: Ø 89.1 x 406W
  • Bearing:6207Z
  • Bundle are drive unit:
  • Driver gear motor: AC-5HP x 4P x 1/19
  • Conveyor roller: Ø216.3 x 450W
  • Roller Chain & Sprocket: RS100
  • Clamp by air cylinder: TC- Ø250 x 400 ST
  • Roller Conveyor after bundling -= 16,000 (mm)
  • Conveyor drive unit:
  • Driver gear motor: AC-7.5 HP x 4P
  • Conveyor roller: Ø267.4 x 600W
  • Clamp by air cylinder: TC- Ø250 x 400 ST
  • Stopper: TC- Ø250 x 530ST
Packing and Bundling System